Skip to content
Two hands wiring terminal blocks in a control cabinet. One hand guides an orange conductor, the other applies a screwdriver.

Custom Solutions

More than 90% of our products are developed to order — designed to your specification and manufactured to the applicable standards. The products shown are examples from our production; whatever you need beyond them, we engineer for you. Development, production and quality testing are all in-house — from sample through batch size one to series production.

Technical Specifications

  • Single-phase transformers (power ratings from 0.015 kVA to 500 kVA)
  • Three-phase transformers (power ratings from 0.05 kVA to 800 kVA)
  • Toroidal variable autotransformers with currents up to 300 A
  • Isolating transformer (with galvanic isolation) up to approximately 700 kVA (max. 2 tonnes)
  • Autotransformer (without galvanic isolation) up to approximately 1.5 MVA (max. 2 tonnes)
  • Transformers with UL approval up to 50 kVA (DRUL range); above that, built to UL requirements using UL-approved materials
  • Chokes up to 1200 A
  • Power control cabinets in the low-voltage range < 1,000 V AC
A smiling man with glasses in a red AQ polo shirt rests one hand on an open, wired control cabinet.

The path to your solution

  1. Get in touch

    Call us, write to us, or use the enquiry form. A short description of what you need is enough to begin.

  2. Your requirements

    Tell us what the transformer or cabinet has to do. Rough figures are fine — we'll ask about anything else we need, and we're happy to help work it out with you.

  3. A first design

    We put together a proposal: the electrical design, the dimensions, how it's built.

  4. Going through it together

    We talk it through with you and adjust whatever needs adjusting. Questions and changes are welcome at this stage.

  5. We build it

    Your transformer and control cabinet are developed, manufactured, and tested under one roof at our Ilshofen-Eckartshausen facility.

  6. Delivery & Support

    We deliver the finished unit, and we're here if anything comes up afterwards.

Precision in control cabinet assembly

We build your cabinet to your specification — from a single unit to full-scale series production. No off-the-shelf control cabinet: custom solutions including our own transformer engineering, all from one source. Protection ratings from IP23 to IP55, standard finish in RAL 7035 or, on request, stainless steel and custom colours, rated up to 500 A / 690 V. Built to DIN EN 60204-1 / VDE, with UL508a certification or Germanischer Lloyd approval available on request. Every cabinet undergoes first-article testing; test protocols, declarations of conformity, 2D/3D drawings, an operating manual, a datasheet, and a wiring diagram are available on request.

View into an open control cabinet: terminal blocks, circuit breakers and orange bundled conductors on mounting rails. On the right, a hand holds a screwdriver.

In-House Winding & Production

Transformer manufacturing is our core competence. For more than 50 years we have been developing and manufacturing transformers, chokes and inductive components at our Ilshofen site. With our own winding shop and a high level of in-house manufacturing, every solution is built exactly for its application — not taken from a standard catalogue. Certification to EN standards and UL stands for the highest standards of quality, safety and reliability. GL approvals are available on request.

Copper strip runs over a forming rail onto a winding mandrel. The winding machine chuck is visible behind.

Quality and Testing

Every unit undergoes individual final testing before it leaves our facility. Test protocols and declarations of conformity are available on request. We manufacture and test to the relevant standards: EN 60204-1 for cabinet construction, EN 61558-2-1, -2, -4, -6 and -13 for mains, control, isolating, safety, and autotransformers, plus UL 506, UL 5085, and CSA 22.2. Germanischer Lloyd approval is available on request.

Case studies

Inductor manufacturing

100 kVA, custom-designed for challenging installation conditions

Custom three-phase transformer for a special-purpose machine manufacturer.

A special-purpose machine manufacturer is developing a new generation of systems for worldwide use on differing supply networks. The system is to be built to an identical design regardless of target market; by the time of the enquiry, the installation space for the power supply had already been fixed in the design.

  • No standard transformer in the required power class could be accommodated in the specified installation space.
  • Differing supply voltages at the sites of use called for special voltages and tappings – within a single component.
  • Converter loads in the system placed increased demands on interference immunity and power losses.
  • Heat dissipation within the closed machine frame was tightly limited.
  • A prototype was required first, followed by recurring series supply.

Rather than adapting a catalogue product, we designed the transformer entirely around the application: core cross-section and winding arrangement were calculated specifically, and the geometry optimised for the available installation space. Tappings cover the differing supply voltages, a screening winding limits interference coupling from the converter loads, and terminal positions and fixing points follow the customer's drawing. The thermal design is based on the real installation conditions inside the closed frame, not on test-bench figures. Prototype and series are produced at our plant in Ilshofen – from the same production, with the same contacts.

The machine design remained unchanged – the power supply adapts to the machine, not the other way round. From prototype to series, the customer receives an identically documented component from a single source, from a batch size of one.

Key data

Power
100 kVA
Design
Three-phase transformer, custom-designed
Special Features
Size-optimised, taps, shielded winding
Insulation Class
F
Certification eligibility
UL / GL on request
Lot size
Starting at 1 unit, up to series production
Electronics

Salt air, vibration, continuous operation – power supply for the harbour crane.

Primary-switched switching power supply with battery charging function for harbour logistics.

A harbour crane manufacturer requires a battery-backed DC power supply for control, safety functions and emergency lowering. The cranes operate worldwide – on differing supply networks and in environmental conditions that rank among the harshest in industry.

  • Salt-laden air, high humidity, temperature cycling and constant vibration in continuous operation.
  • Differing supply conditions worldwide – the requirement was one unit for all markets rather than a variant for each target region.
  • A supply failure means standstill at the quayside – with immediate consequential costs for the operator.
  • Requirements of the marine application regarding construction and documentary evidence.

A regulated, primary switched-mode power supply with integrated battery charging section and battery management, built to a marine specification. The wide-range input allows the same unit to operate on all intended supply networks; the output voltage is DC 24 V. A special enclosure up to IP65 protects the electronics from salt air and moisture, and customer-specific signalling and switching contacts integrate the unit directly into the crane control. Transformers and chokes are developed in house and designed together with the circuit.

Electronics development and transformer manufacturing under one roof: the magnetic components are not bought in but designed together with the circuit – power supply and magnetics are created as one unit. The same expertise goes into our power supplies for electroplating, where high direct currents at low voltage have to be delivered cleanly and continuously.

One assembly instead of several suppliers, one contact for electronics and magnetics – and a unit developed for the conditions at the point of use, not for the catalogue.

Key data

Product
Primary-side switched-mode power supply with charging function
Input
Wide voltage range AC 90–264 V / 196–460 V
Output
DC 24 V, power 1440 W
Design
Marine, special housing up to IP65
Functions
Battery management, customer-specific signal contacts
Vertical integration
In-house development of electronics and magnetic components
Systems engineering & control cabinet construction

One system, two power grids, one certification – the path to North America.

Power distribution cabinet with UL 508A certification for a manufacturer of industrial 3D printing systems.

A manufacturer of industrial 3D printing systems is entering the North American market in volume for the first time. The system is designed for the European supply network, the target network differs – and without approval to a North American standard, the machine cannot be put into service.

  • Adapting the power supply to the North American network without intervening in the design of the machine.
  • Requirements under UL 508A for component selection, construction, wiring, marking and documentation.
  • The built-in transformer must itself be eligible for approval – this is where many projects stall.
  • Coordination between control cabinet builder, transformer supplier and testing body was not to rest with the customer.

We built the complete power distribution cabinet to UL 508A – including the matching and isolating transformer from our own production, designed and executed as a component eligible for approval. Degree of protection to suit the site (IP23–IP55), enclosure design to customer specification, wiring and marking to standard, factory testing with test report. Engineering, manufacturing and testing remained in one hand throughout; what was delivered was a ready-to-connect unit.

No rework on site, no coordination with third parties, one contact for transformer and cabinet – and a design that can be reproduced identically for follow-on systems.

Key data

Solution
Power distribution cabinet, ready for connection
Standard
UL 508A, transformer suitable for UL/CSA approval
Protection class
IP23–IP55
Voltage
up to 690 V, power rating project-dependent
Design
Painted, stainless steel, or custom colour
Scope of Services
Engineering, manufacturing, testing – all from a single source

Have a project in mind? Get in touch.